Kitchen Countertop Installation Cost in Dubai: Quick Price Table

If you only need a fast budget before choosing a slab, use the table below as a starting point. These figures are not a fixed quotation because two kitchens with the same length can require very different quantities of raw slab once corners, veins, seams, backsplashes and cut-outs are planned.

At the whole-project level, most simple replacements sit below a full kitchen renovation budget because you are keeping the cabinets and layout. Once the countertop project includes a large island, bookmatched stone, full-height splashbacks or multiple waterfall ends, it should be treated as a custom stone package rather than priced from a single “per metre” number.

How Much Does Each Countertop Material Cost to Install?

Material choice controls the starting price, but it does not tell you the final cost by itself. A low-cost slab with two sink cut-outs, a hob cut-out, a waterfall end and difficult delivery can cost more to fabricate than a higher-priced slab on a simple straight run. We therefore recommend comparing the material, fabrication and installation as separate line items.

Laminate Countertop Installation Cost

Laminate is usually the cheapest route when you want to change the worktop without rebuilding the kitchen. A planning allowance of AED 150–400 per linear metre works for many straightforward installations, although compact jobs can carry a minimum visit or installation charge that makes the effective rate higher.

The most economical setup is a straight run with standard factory edges and minimal cutting. Costs rise around undermount sinks, irregular walls, multiple corners and jobs where the old countertop has damaged the cabinet tops underneath. Laminate is therefore most attractive when the existing units are level, square and reusable.

Granite Countertop Installation Cost

Granite can start around AED 330 per linear metre for economical selections and move beyond AED 1,200 per linear metre when the stone, thickness or fabrication is more demanding. Because granite is natural, you are paying for an actual slab pattern rather than a perfectly repeatable printed surface.

Before approving granite, check the slab itself, not only a small sample. Vein direction, natural fissures, shade variation and where seams will land all affect the final appearance. Heavy pieces also require careful site access and proper support around sink and hob openings, especially on long unsupported spans.

Quartz Countertop Installation Cost

Quartz commonly falls around AED 385–1,500 per linear metre in a finished kitchen budget, with many standard Dubai projects landing in the middle of that range. Simple colours and standard slab sizes cost less, while dramatic veining, larger slab formats, thick mitred edges and oversized islands move the price upward.

Quartz is popular because daily cleaning is straightforward and sealing is generally not part of the routine maintenance plan. Heat still needs to be managed carefully, so trivets are sensible for hot cookware. The biggest quote differences usually come from slab selection and fabrication rather than the basic installation labour.

Solid Surface / Corian Countertop Installation Cost

Solid-surface worktops generally sit around AED 495–900 per linear metre for standard projects. Their strongest advantage is design flexibility: joints can be made visually subtle, curved details are possible, and some sink or backsplash details can be fabricated for a continuous appearance.

Complex thermoformed curves, integrated basins and unusual shapes need more workshop time, so they should be priced from drawings rather than a simple metre rate. If the kitchen has many small returns and corners, the material can sometimes be easier to detail than brittle slab products, but fabrication skill still determines the finish.

Porcelain Slab Countertop Installation Cost

Porcelain slab countertops are typically a premium installation and can range from roughly AED 800 to AED 3,500 per linear metre depending on the slab and the amount of specialist fabrication. Large slabs are thin relative to their size, which makes transport, cutting and handling especially important.

Mitred waterfall ends, full-height backsplashes and bookmatched patterns can create a very clean architectural result. Those same details increase workshop time and material waste. A low material price is therefore not enough to judge the job; ask how corners, exposed edges, sink openings and slab handling are being priced.

Natural Marble Countertop Installation Cost

Natural marble has the broadest price range in this guide, from about AED 1,100 to AED 5,000+ per linear metre for finished countertop work depending on the actual slab. A common stone with simple fabrication is very different from a rare imported slab that must be vein-matched across an island and waterfall ends.

Colour also changes both design and sourcing. Light beige marble can suit warm neutral kitchens, while Armani grey marble gives a darker contemporary appearance. Whichever stone you choose, allow for sealing, careful cleaning and the fact that acidic foods can etch many marbles.

Per Linear Metre vs Per Square Metre: Why Dubai Quotes Look So Different

A standard kitchen worktop is often around 600 mm deep. At that depth, one linear metre represents roughly 0.6 square metre of visible horizontal surface. That conversion is useful for understanding dimensions, but it is not a reliable way to convert a slab quote into a final installed price.

Stone is purchased and cut from slabs. Your fabricator must account for slab dimensions, veins, defects, seams, sink openings, hob openings, upstands and any pieces needed for an island or waterfall end. A 4-metre countertop layout can therefore consume much more than 2.4 square metres of purchased slab.

Typical Total Kitchen Countertop Project Costs in Dubai

Most customers want to know the finished number, not only the rate per metre. The ranges below combine the practical pricing bands supplied for this guide with current Dubai market benchmarks. They assume a usable existing cabinet base and do not include a full cabinet renovation.

These ranges are intentionally broad because a “typical kitchen” is not a standard measurement. A compact apartment galley may have only two short runs, while a villa kitchen can include an L-shaped perimeter, breakfast counter, pantry top and large central island.

Sink Cut-Outs, Hob Cut-Outs and Fabrication Costs

Fabrication is where many countertop budgets change after the customer chooses a slab. A stone top must be measured, templated, cut, edge-finished and prepared for every appliance opening. Simple rectangular openings are cheaper than polished undermount sink cut-outs or complicated shapes.

Use these figures as allowances rather than fixed menu prices. A delicate natural stone can require more reinforcement and slower cutting than an uncomplicated manufactured slab. For specialist marble installation in Dubai, the fabrication method should be confirmed before the slab is cut.

How Much Do Countertop Edge Profiles Add?

The edge is one of the easiest places to overspend without realising it. A standard eased or straight polished edge normally requires the least fabrication, while ogee profiles, thick built-up edges and mitred waterfall details require more cutting, bonding and finishing.

Ask whether the quoted edge price is for exposed edges only or every linear metre of the countertop. Wall edges normally do not need decorative polishing, so an itemised quote should distinguish visible finished edges from hidden edges.

Old Countertop Removal, Disposal and Plumbing Costs

Replacing a worktop is easier when removal is planned before the new slab arrives. A typical allowance of AED 300–1,000 covers many simple countertop removal and disposal jobs, but heavy stone, restricted lift access, long carrying distances and high-rise loading rules can move the price higher.

If the project expands into flooring or wall finishes, price those works separately rather than hiding them inside the countertop line. For comparison, this detailed tile installation cost UAE guide explains why natural stone, large formats and site preparation have different labour requirements.

Worked Examples: What a Dubai Countertop Project Can Actually Cost

The examples below show how the final number builds up. They are deliberately itemised so you can replace our assumptions with your own measurements. VAT is not added in the example totals because some quotations are shown VAT-inclusive and others exclude it; always check the written quote.

The high end is not a prediction that every marble or porcelain kitchen will cost that much. It shows why “AED 18,000+” should be treated as an open-ended luxury category rather than a hard ceiling. A rare slab, oversized island or two waterfall ends can consume significantly more material than a standard perimeter worktop.

Example: 4.5 Linear Metres of Quartz in an L-Shaped Kitchen

Suppose your L-shaped kitchen measures 2.7 metres on one wall and 1.8 metres on the return. At a quartz planning rate of AED 385–1,500 per linear metre, the base countertop allowance is roughly AED 1,730–6,750 before extras.

Add an undermount sink cut-out, hob cut-out, two tap/accessory holes, removal and plumbing, and a realistic planning total becomes roughly AED 2,660–9,450. If you select a premium slab, request a thick mitred edge or add a backsplash in the same material, the final figure can move above that band.

Example: Villa Island With a Waterfall End

An island changes the economics because depth can be 900–1,200 mm rather than the usual 600 mm perimeter depth. The top therefore consumes more slab per linear metre, and a waterfall end needs a separate vertical panel plus a carefully fabricated mitred joint.

For this reason, islands should be priced by actual dimensions and slab layout rather than by multiplying a normal worktop rate. If you want the vein to continue from the horizontal top down the side, the fabricator may need a specific slab orientation that creates additional waste.

What Changes Kitchen Countertop Installation Cost the Most?

The final price is driven by more than the stone name. In practice, the following variables explain most of the difference between a simple AED 4,000 project and a custom project costing several times more.

Stone Selection Can Matter More Than the Material Category

Two marbles can have completely different prices even when their thickness is identical. The same applies to granite. Availability, slab dimensions, colour consistency, vein pattern and how much usable material remains after defects are avoided can all change the real cost.

Warm stones such as travertine marble are sometimes considered for related interior surfaces, while silver travertine offers a cooler natural-stone palette. For a kitchen worktop, however, choose the surface according to food-contact practicality, maintenance expectations and the specific slab condition rather than colour alone.

Related Stone Details Should Be Budgeted Separately

A countertop quote should stay focused on the countertop. If the renovation also includes a marble threshold, natural stone window sills or flooring interfaces, list those items separately so you can see what each part of the stone package costs.

Commercial and office renovations may also involve a raised floor, which has an entirely different structure and installation method from a countertop. Separating scopes keeps your kitchen cost transparent and prevents a large general “stone works” allowance from hiding the real price of the worktop.

How Much Does It Cost to Renovate a Kitchen in Dubai?

A countertop replacement is not the same as a full kitchen renovation. Current Dubai planning ranges commonly place a focused refresh around AED 8,000–25,000 or higher depending on scope, a standard full renovation around AED 30,000–90,000, and a premium or heavily reconfigured kitchen from roughly AED 90,000 to AED 200,000+.

Cabinetry is usually the largest cost. Countertops can account for a meaningful share of the remaining budget, but plumbing, electrical, appliances, flooring, backsplash work, demolition and approvals can quickly exceed the worktop itself if the layout changes.

If you are also changing floor or wall finishes, use a separate installation allowance rather than assuming it is included with the countertop. Arifeen Marble’s UAE stone and tile resources are useful for understanding how size, substrate condition and natural-stone handling change installation labour.

Can You Redo a Kitchen in Dubai for AED 20,000?

Yes, an AED 20,000 budget can produce a meaningful kitchen refresh in Dubai, but it is not a realistic allowance for every full renovation. The budget works best when the layout stays exactly where it is, the cabinet boxes are structurally usable, plumbing and electrical points remain in place, and you choose a controlled countertop specification.

Moving the sink, changing gas points, replacing all cabinets or adding a large island can make AED 20,000 insufficient very quickly. If the existing kitchen is sound, put money into the surfaces you see and touch every day rather than creating expensive structural work.

How Much Does a 12×12 Kitchen Cost in Dubai?

A 12×12-foot kitchen is about 144 square feet, or roughly 13.4 square metres of floor area. That floor measurement does not tell you the countertop quantity, because worktops are installed along cabinets rather than across the entire room.

A 12×12 kitchen might have roughly 4–7 linear metres of perimeter countertop, and an island can add another 1.5–3 metres depending on the layout. For the countertops alone, a practical budget could be around AED 4,000–15,000 for many standard quartz or granite layouts, with premium porcelain or marble moving beyond that range.

How to Estimate Your Own Countertop Budget Before Requesting a Quote

Start by measuring every countertop run along the wall in millimetres. Add the lengths together, then note the depth of each section. Record islands separately because they are usually deeper than perimeter countertops and may require finished edges on all sides.

Next, count every sink, hob, tap hole, pop-up socket and waterfall panel. Photograph corners, lifts, stairs and any narrow access route that could affect slab delivery. Finally, choose a material category and a realistic finish level rather than selecting a single price from the cheapest online listing.

Should You Choose Marble, Granite, Quartz or Porcelain?

Choose according to how you use the kitchen, not only how the sample looks under showroom lighting. Granite is strong and heat-tolerant, quartz is easy to maintain for busy homes, porcelain can create very clean large-format designs, and marble offers unique natural veining with more maintenance responsibility.

If you want natural stone throughout the wider home, coordinating the kitchen with floors, thresholds and decorative pieces can create a more deliberate finish. A small marble tray made from a related stone can also carry the material palette into dining or coffee-table styling without committing another architectural surface to the same slab.

What About Stone Work in Sharjah?

For customers comparing Dubai and Sharjah, the stone itself may be identical while transport, site access, labour and building procedures change the final installation cost. Workshop location also matters because heavy slabs must be fabricated, transported and handled safely.

If your wider project needs marble contracting Sharjah support, define the countertop scope in exactly the same way: material, slab thickness, cut-outs, edge detail, delivery, fixing and finishing. Arifeen Marble can also be referenced when you are planning broader UAE marble and stone requirements alongside the kitchen.

VAT, Building Access and Approval Costs

The UAE standard VAT rate is 5% for taxable supplies unless a specific zero-rate or exemption applies. When comparing countertop quotations, confirm whether the displayed total already includes VAT so that two otherwise similar quotes are not being compared on different tax bases.

A simple countertop replacement is also different from structural renovation. Building management may still require contractor documents, access bookings, protection of common areas or approved working hours. If the kitchen project starts moving walls or making significant alterations beyond basic replacement work, approval requirements can change, so those costs should be confirmed for your building or community before demolition begins.

What a Proper Kitchen Countertop Quote Should Include

A good quotation lets you see exactly what you are buying. If the document only says “quartz countertop – AED 7,500,” you cannot tell whether the quote includes the slab, fabrication, sink cutting, delivery, VAT or installation.

Where Customers Commonly Overspend

The first mistake is choosing a slab before confirming how much of it the kitchen actually needs. A dramatic vein may force the workshop to rotate pieces or buy another slab to keep the pattern continuous. The second is assuming every edge and cut-out is included in the headline rate.

Another common problem is changing sink or hob models after fabrication has started. Appliance openings are cut to specific dimensions, so late changes can create rework or even make a finished piece unusable. Confirm all cut-out templates before production.

Finally, do not spend the entire budget on the stone and leave nothing for removal, plumbing and site preparation. A beautiful slab installed over uneven or unsupported cabinets is not a good result, regardless of how expensive the material was.

How We Recommend Comparing Countertop Quotes

Put each quote into the same four buckets: material, fabrication, site installation and extras. Compare the actual stone or surface specification first, then check whether cut-outs, polished edges and waterfall panels are priced in the same way.

After that, look at removal, delivery and plumbing. The cheapest total is only meaningful when the scope is identical. One quote can appear AED 1,500 lower simply because old-top removal, sink reconnection and VAT are missing.

For natural marble, inspect the slab before fabrication whenever possible. For quartz or porcelain, confirm the exact colour, finish, thickness and slab format. The best comparison is a written, itemised quotation based on the same measured drawing.

A Note on Natural Stone Beyond the Kitchen

Customers renovating more than one room often get a better design result by planning related stone details together, while still pricing each scope separately. Kitchen countertops, thresholds, sills, vanity tops and flooring all use stone, but they are fabricated and installed differently.

If you are coordinating several natural-stone items, Arifeen Marble is the company we would mention for broader marble-related planning. Keeping the stone palette consistent can help the interior feel connected, while separate itemisation keeps the budget transparent.